| Customization: | Available |
|---|---|
| Type: | Metal Processing Equipment |
| Application: | Reduce Friction on The Hose |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Concrete pumping hoses skid plate disc pan is made of #20 steel and protective coatings. The concrete hose skid plate supports rubber hoses, protecting them from damage when moving. Also, the concrete hose support disc saves labor during operation.
The skid pan or concrete hose placement disc is used to reduce friction on the hose from the ground. Hoses used for pumping often surge backwards and forwards on the ground creating a bare patch on the hose. Once the wires are exposed they can corrode very quickly or if the hose isn't turned or replaced, the wires will break leading to an increase risk of bursts. By using the skid pan, you're lifting the hose from the ground, eliminating the abrasion, extending the life of the hose and therefore saving cost on replacement hoses.
Protective coating
Protective coatings are used in harsh, corrosive environments. They can delay and weaken the corrosion of concrete hoses and skid disc structures. The concrete hose and skid discs work in corrosive places, and the protective coating offers much help.
Concrete hoses skid plate 20#steel technical data
#20 Steel of concrete hoses skid plate have good toughness, plasticity and weldability. The tensile strength is 253-500mpa.
| C | Si | Mn | P | S | Ni | Cr | Cu |
| 0.16~0.22 | 0.16~0.36 | 0.36~0.66 | ≤0.035 | ≤0.035 | ≤0.31 | ≤0.25 | ≤0.25 |
25''*25'', 26''*26'', 30''*30''
Concrete pumping Hoses Skid Plate Disc Application
){kind=link}